Products

Switches

Products distributed in the province of: Quebec
Thermal Dispersion

Thermal Dispersion

Kayden offers a complete line of thermal dispersion flow, level and interface switches for liquids and gases.

Kayden Instruments
Laser

Laser

The ABB family of laser volume and level products, LM80 and LM200 provide solutions for the following applications: inventory in bunkers, blending hoppers, reactor vessels, level control, volumetric measurement, and various dry bulk solids and opaque liquids in silos.

ABB
Buoyancy Level Sensors and Switches

Buoyancy Level Sensors and Switches

ABB offers a complete line of buoyancy point level switches for just about any chemical, petroleum or general process application.

This family of products include horizontal floats, vertical floats, and displacer switches of all kinds. ABB's simple and reliable design offers great flexibility with custom insertion lengths, temperature ratings to 1000ºF/ 38ºC. Pressure ratings to 5000 psig/345 bar, and a wide selection of alloys. The ABB buoyancy switches are the highest quality and cost efficient solution to industrial liquid level point sensing.

ABB
SoliTrak (Plumb bob device)

SoliTrak (Plumb bob device)

The SoliTrak™ is an electro-mechanic level measuring instrument for the continuous measuring of level in hoppers, silos or tanks. This top mounted system is used for monitoring the level in applications such as powders, small grain bulk materials or coarse grain bulk materials. A bob weight is mounted at the end of a measuring rope or tape, which is wrapped on a motor driven rope roller. Upon contact with the bulk material, the bob weight returns and is drawn back to its upper stop position.

The housing is divided into two independent chambers (the rope chamber and the electronic chamber, seen below), which are sealed to each other to isolate electronics from the process. Only the rope chamber is in contact to the inside of the silo during the measurement. If the bob weight is in the upper stop position, it seals the opening between the unit and the silo. Pulses are generated during downward movement and the number of pulses can be processed directly in a PLC (programmable logic controller) or a counter.

ABB