Products

Fluid conditioning

Products distributed in the province of: Quebec
 Sample Gas Coolers (Peltier)

Sample Gas Coolers (Peltier)

ECP2000 -With patented Jet-Stream heat exchanger - Ambient temperature up to +50°C - Dew point +5°C +/-0,1°C - With alarm contact - Small dimensions, light weight - Optimum reliability Application: The ECP 2000 gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors.

M&C TechGroup
Absorption Filters

Absorption Filters

F...-AP - Chargeable with a variety of adsorption materials - Easy change of filling materials - Condition of filling material visible from outside - Different filter materials - Wall mounting Application: In analysis technique M&C FP-...-D/F and F..-AP universal filters are used for the adsorption of components which cause interferences.

M&C TechGroup
Dilution Probes

Dilution Probes

Dilute the gas directly at the sample point, dilution ratio 500:1 down to 10:1 SP2000-H/DIL -Based on probe SP2000H/.... -Electrically heated up to 180?C -External critical orifice is heated -Including a dilution gas pre-heater -No dew point problems -Dilution rates from 10:1 up to 500:1 -With check gas connection -Independent of the process temperature -Easy operation and maintenance Application: The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.

M&C TechGroup
Gas Sample Probes (heated and unheated)

Gas Sample Probes (heated and unheated)

SP10 -Sampling of dusty process gases -Fast response time -Easy mounting and maintenance -Various materials and lengths for extension tube and filters -Many optional configurations are available Application: The M&C gas sample probes, Version SP 10, are to be installed for continuous sampling of high dust loaded gases, large flow sampling, as well as for general gas sampling. Due to its compact design, it requires only limited space.

M&C TechGroup