Products

Gestra

Products distributed in the province of: Quebec

Valves & Final Elements / Steam solutions / Control valves

Steam control valves

Steam control valves

The high-quality product range of GESTRA control valves is precisely tailored to suit customer requirements.
The valves are manufactured from a great variety of materials to suit each particular application, and the individual components are perfectly harmonised with one another. Individual, special materials can also be produced.

  • CW Cooling-water control valves
  • BW Return-temperature control valves
  • ZK with radial stage nozzle

 

Gestra

Valves & Final Elements / Steam solutions / Monitoring condensate

Monitoring condensate

Monitoring condensate

Wherever plants work with steam, this produces condensate that holds a lot of heat energy. To run a plant cost-effectively, recovering this energy for use in the plant is indispensable.

Monitoring systems counter the risk of contaminated condensate due to the ingress of products. Here, we distinguish between substances that influence the electrical conductivity of the condensate, and those that cause turbidity or refraction. Conductivity is monitored by electrodes and the electronic control unit, while oil and turbidity detectors are used to detect oil, grease, etc.

  • Monitoring foreign matter
  • Contamination by oil.
  • Contamination by acids
  • Ingress of oil in cooling water

Gestra

Valves & Final Elements / Steam solutions / Steam Traps

Steam trap testing equipment

Steam trap testing equipment

Prevent steam leakage and banked-up condensate with state-of-the-art technology - VKP 10, VKP 40 plus, VKP 40 plus Ex

Steam traps are subject to wear. This in turn leads to loss of steam or banking-up of condensate. Experience shows that the failure rate of faulty steam traps is as much as 25 %. This failure rate can be slashed to less than 5 % with annual inspections and the necessary maintenance.

Steam traps of all makes can be inspected by ultrasonic measurement during ongoing operation. The measured ultrasonic spectrum is shown on a display unit as needle deflection on a scale, or as a curve on a graph, depending on the testing system used.

Gestra
Steam traps BK series

Steam traps BK series

Features of the GESTRA BK series:

  • Robust Duo Stainless Steel (Bimetallic) Regulator PN 40 - PN 630
  • Unaffected by waterhammer and frost
  • Suitable for superheated steam applications
  • Stainless steel internals
  • Installation in any position
Gestra
Steam Traps DK Series

Steam Traps DK Series

Features of the GESTRA DK series:

  • Compact, highly responsive regulator
  • Small number of functional parts
  • Drainage with practically no banking-up
  • Any installation position – in horizontal or vertical pipes
  • Reliable back pressure up to 80% of upstream pressure
  • Available as an easy-to-install RHOMBUSline body with exchangeable regulator, or as a compact version
  • Inner parts made of corrosion-resistant stainless steel
Gestra
Steam traps MK series

Steam traps MK series

Features of the GESTRA MK series:

  • Membrane Regulator PN 25 - PN 40
  • Very sensitive response characteristic
  • Function is not impaired by high back pressure
  • Built-in non-return valve
  • Stainless steel internals
  • Installation in any position
  • High hot-water capacities
  • even with low differential pressures
Gestra
Steam traps UNA series

Steam traps UNA series

Features of the GESTRA UNA series:

  • Unaffected by back pressure and condensate temperature
  • No loss of live steam
  • No banking-up of condensate even with extreme load and pressure fluctuations
  • Particularly well suited for heat exchangers
  • Unaffected by dirt
  • Automatic thermostatic air-venting
  • Repairable in-line
  • Ideal for discharging cold condensates, distillates and condensates derived from chemical products
Gestra

Valves & Final Elements / Steam solutions / Swing check valves

DISCOCHECK dual-plate check valves BB

DISCOCHECK dual-plate check valves BB

Quality made by GESTRA

The high-quality product range of GESTRA check valves is precisely tailored to suit customer requirements. The valves are manufactured from a great variety of materials to suit each particular application, and the individual components are perfectly harmonised with one another. Individual, special materials can also be produced.

GESTRA check valves are wafer-type valves with a short overall length. They have considerable structural and hydrodynamic advantages over conventional valves:

  • Compact design
  • Low weight
  • Any installation position
  • Low installation costs
  • Large choice of materials
  • Space-saving storage
  • Reliable operation of industrial systems
  • Minimal pressure losses
Gestra